Otherwise, the Wi-Fi or 3G DNS server is used, which will not be able to resolve hosts within the company intranet.Ĩ. When the mobile device user accesses a URL, iOS determines if the domain matches the VPN interface's domain, and if so, uses the VPN interface's DNS server to resolve the host-name lookup. This DNS domain is set on the VPN interface of the iPhone/iPad after the device makes a connection to the appliance. Note For appliances supporting connections from Apple iPhones, iPads, or other iOS devices using SonicWALL Mobile Connect, the DNS Domain is a required field. (Optional) In the DNS Domain field, enter the domain name for the DNS servers. (Optional) In the DNS Server 2 field, enter the IP address of the backup DNS server.ħ. In the DNS Server 1 field, enter the IP address of the primary DNS server, or click the Default DNS Settings to use the default settings.Ħ. In the NetExtender End IP field, enter the last IP address in the client address range.ĥ. In the NetExtender Start IP field, enter the first IP address in the client address range.Ĥ. Note The IP address range must be on the same subnet as the interface used for SSL VPN services.ģ. In the Interface pull-down menu, select the interface to be used for SSL VPN services. Navigate to the SSL VPN > Client Settings page.Ģ. To configure the SSL VPN Client Address Range, perform the following steps:ġ. The indicator should be green for the Zone. Note On the SSL VPN > Server Settings page, enable SSL VPN access on the Zone before users can access the Virtual Office web portal. Note The range must fall within the same subnet as the interface to which the SSL VPN appliance is connected, and in cases where there are other hosts on the same segment as the SSL VPN appliance, it must not overlap or collide with any assigned addresses.
#SONICWALL SSL VPN CLIENT ONE TIME PASSWORDS PLUS#
The range needs to be large enough to accommodate the maximum number of concurrent NetExtender users you wish to support plus one (for example, the range for 15 users requires 16 addresses, such as 192.168.200.100 to 192.168.200.115). The SSL VPN Client Address Range defines the IP address pool from which addresses will be assigned to remote users during NetExtender sessions. For further information, see Network > Zones.Ĭonfiguring the SSL VPN Client Address Range SSL VPN Access can also be configured on the General tab of the Edit Zone window of the Network > Zones page by clicking the Edit icon in the Configure column for the zone. For further information, see SSL VPN > Server Settings. To change the SSL VPN access for a zone, simply click the name of the zone on the SSL VPN > Server Settings page. A red button indicates that SSL VPN access is disabled.
A green button to the left of the name of the zone indicates that SSL VPN access is enabled. SSL VPN access must be enabled on a zone before users can access the Virtual Office web portal. Configuring NetExtender Client SettingsĪll of the zones on the SonicWALL security appliance are displayed in the SSL VPN Status on Zones section of the SSL VPN > Server Settings page.Configuring the SSL VPN Client Address Range.The page also displays which zones have SSL VPN access enabled. The SSL VPN > Client Settings page allows you to enable SSL VPN access on zones and configure the client address range information and NetExtender client settings.
0 kommentar(er)
